The A-Star 32U4 Prime SV is a programmable board based on Atmel’s ATmega32U4 microcontroller and arranged in the common Arduino form factor.
The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 5 V to 36 V., The A-Star 32U4 Prime SV is available in several configurations; item #3113 has no microSD support and includes preinstalled female headers common to many Arduinos.
The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. As such, the A-Star Prime (abbreviated A* Prime) is compatible with many Arduino shields, including all of the Arduino shields we carry. All 26 of the microcontroller’s GPIO lines are accessible on the board, including seven than can be used as PWM outputs and twelve that can be used as analog inputs. The ATmega32U4 is capable of native full-speed USB, which makes it more versatile than similar boards that rely on USB-to-serial adapters: in addition to supporting a virtual (CDC) serial/COM port interface, the A-Star can appear to a connected computer as a mouse and keyboard. The A-Star’s USB interface can be accessed through its USB Micro-B connector. The A* Prime supports the on-board microcontroller with many additional features and improvements over competing products, including enhanced connectivity and superior power management.
Programmable ATmega32U4 MCU with 32 KB flash, 2.5 KB SRAM, 1 KB EEPROM, and native full-speed USB (clocked by precision 16 MHz crystal oscillator).
Preloaded with Arduino-compatible bootloader (no external programmer required).
All 26 general-purpose I/O lines from the ATmega32U4 are broken out (including PB0, PD5, and PE2); 7 of these can be used as hardware PWM outputs and 12 of these can be used as analog inputs.
Convenient 0.1″-spaced power, ground, and signal connection points..
3 user-controllable LEDs 3 user pushbuttons Reset button.
Power features: Can be powered from USB or from an external source (with several access points for connecting external power). SV operating range: 5 V to 36 V Switching 5 V regulator enables efficient operation 3.3 V rail supplied by 300 mA linear regulator Power switch for external power inputs. Reverse-voltage protection on external power inputs Power selection circuit allows for seamless switching between power sources while providing overcurrent protection, and feedback about which power source is selected.
6-pin ISP header for use with an external programmer.
Comprehensive user’s guide