SyRen10A Motor Control

Be the first to review this product

Availability: In stock

£40.95
OR

Quick Overview

SyRen10 motor control for brushless DC motors. syren10 is suitable for the propulsion of robots up to 45 kg (15 kg for combat robots), for electric vehicles, etc.

SyRen 10A 6V-24V Regenerative Motor Driver

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

SyRen10 universal motor control, effective and easy to use for brushless DC motors. It is suitable for the propulsion of robots up to 45 kg (15 kg for combat robots), for electric vehicles, pumps, automation, etc.

During each slowdown or change of direction of rotation of the motor, the SyRen10 motor driver recharges the battery, allowing an increased autonomy of the robot. It allows sudden changes of direction and quick stops.

The control can be carried out using an analog voltage, an RC signal or a serial signal. The use of two SyRen10 cards allows differential control (like tanks) without external mixing, thanks to Diff-drive and RC modes. A 5 VDC output is available to power a microcontroller or RC receiver.

Carefully observe polarity. A polarity reversal will cause the card to be destroyed and the warranty will not apply.

Power supply: 6 to 24 VDC (NiCd, NiMh, Lithium, Lead Acid)

This card can not be powered by AC power.

Output current: - 10 A continuous (15 A peak) up to 18 VDC - 8 A continuous / 10 A continuous with additional radiator (15 A peak) from 18 to 24 VDC

Control signal:

- Voltage Analog 0 to 5 Vdc

- radio signal RC

- serial link

Status indication via LEDs

Thermal and overload protection

Dimensions:

Size: 1.4” x 2.25” x .55” 35 x 57 x 14 mm

 

- Technical sheet

Arduino library

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.